Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Raleigh, NC

Martin Door Garage Door Installation in Raleigh, NC

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed. Typical cost $1,200-$4,500.

Garage doors rarely fail at a convenient time. If you need Martin Door garage door installation in Raleigh, NC, we can often come out the same day when a technician is available. New steel, insulated, wood-look and carriage-style doors, measured and professionally installed. Our technicians service Martin Door garage doors regularly and know where the model and date labels are, which makes ordering the right part quicker.

Is it time for Martin Door garage door installation?

  • Several damaged panels or a rusted-through door
  • No insulation in an attached or heated garage
  • An outdated look that hurts curb appeal
  • Repeated repairs on an old door

Common causes

  • Doors typically last 15-30 years depending on material and care
  • Storm or impact damage
  • Updating the home's look or efficiency

Safe checks before you call

  • Measure the opening width and height, plus the headroom above it.
  • Decide on insulation, windows and style before choosing a model.
  • Ask whether wind-load requirements apply in your area.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Measure the opening, headroom and side room
  2. Help you choose material, insulation, style and color
  3. Remove and haul away the old door
  4. Install the new door, tracks, springs and seals
  5. Balance it, connect the opener and test it

Martin Door Garage Door Installation cost in Raleigh, NC

$1,200-$4,500Typical range, parts & labor
4-6 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Martin Door services

Martin Door Garage Door Installation in Raleigh, NC

For North Carolina homes, look at insulated steel or composite doors that resist moisture, and ask whether wind-load requirements apply to your area before you choose a model.

Parts of North Carolina are exposed to hurricanes and tropical storms. A garage door is often the largest opening in a home, so wind-rated doors and reinforcement kits matter here, and building codes in coastal areas may require them when a door is replaced.

Technicians serve all of Raleigh (ZIP codes 27601, 27602, 27603, 27604, 27605 and more), plus Garner (4.4 mi), Cary (8.1 mi), Knightdale (8.9 mi) and Morrisville (11.1 mi). Call (833) 435-8883 to book a visit in Raleigh.

Martin Door Garage Door Installation: frequently asked questions

How much does Martin Door garage door installation cost in Raleigh, NC?

Martin Door Garage Door Installation typically costs $1,200-$4,500 including parts and labor, and usually takes 4-6 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Martin Door garage door installation the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Martin Door garage door installation covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Martin Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where North Carolina or Raleigh requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Raleigh, NC

Moore-O-Matic Garage Door Sensor Repair

Moore-O-Matic openers are no longer made. We can often keep one running with available parts, or recommend a modern replacement.

Typical $100-$250

Northwest Door Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Richards-Wilcox Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

DBCI Roll-Up Door Repair

DBCI makes roll-up doors and hallway systems for self-storage.

Typical $150-$600

Martin Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

CHI Overhead Doors Extension Spring Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$350

Garaga Torsion Spring Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $200-$450

Windsor Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Wayne Dalton Garage Door Roller Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Midland Garage Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Garage Door Hinge Replacement

Cracked or loose hinges replaced so panels stay aligned and quiet.

Typical $100-$250

Raynor Torsion Spring Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $200-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Raleigh, NC now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote